Fisheries Development,Freshwater Fish,Seawater Fish, Selling Vaccines Fish

Wednesday, May 25, 2011

Eye Ablation in Spawning Shrimp

Eye ablation was one of much Shrimp spawning technique that found at eighties. although it looks like a tortured parent shrimp but the technique is considered the best at that time.purpose of this eye ablation to decide the path ecdysteroid hormones that regulate molting and regeneration in the prawn. ecdysteroid hormone is synthesized in organs neuropeptide y on setting eyes on stalks. eye ablation is usually done by cutting the shrimp eye stalks will stimulate ecdysteroid secretion of hormones so that an accelerated molt cycle.
Activities eye ablation done on hard-skinned female shrimp are not new or at moulting condition. For new shrimp will experience stress if performed ablation.
Eye ablation can be done in various ways, either by cutting the stalk eyes and it could also divide the eye and remove the shrimp eyeballs, but ablation of the eye that is often done is by splitting the eye by using a razor blade tool and then removed his eyeballs right eye over which the female is held by way of folding the tail towards the stomach slowly so that the parent is not able to wriggle again when ablation is done after splitting the eyes and the scar was clean with a solution of treflan. This is done to prevent infection of the wound and then soaked in a solution of potassium permanganate (KMnO) 1-2 ppm for one minute. After it is inserted into the female parent spawning tanks and united with the male parent. The success of ablation process of the eye characterized by swimming towards the front or the female parent to move forward after put into water.

Read More..

Wednesday, June 30, 2010

10 STEPS FOR POND PREPARATION

Aquaculture Fisheries Development :
10 STEPS FOR POND PREPARATION
Reducing Risks of Aquatic Animal Disease Outbreaks
-->The pond has to be wet to check if the pond bottom is dirty. If your pond is dry get your pond bottom wet for at least 3 days. If your pond is full, drain it almost completely



  • --> -->Check if the soil is black or smells bad. If the soil is black or smells it means that the pond bottom is dirty
  • Remove as much as
  • Read More..

    Thursday, June 17, 2010

    About ULTRA ISO


    UltraISO is a CD image file creating/editing/converting tool, it can directly edit the CD image file and extract files and folders from it, as well as make ISO files from your CD-ROM or hard disk. At the same time, you can maintain the ISO bootable information, thus creating your own bootable CDs. With UltraISO, you now have the power to make and edit your own ISO files, and then burn them
    to CD for your own needs.

    UltraISO runs on Windows 98/Me/NT/2000/XP/2003/Vista operating system.

    UltraISO can:

    1. Duplicate disc to ISO file from CD-ROM.
    2. Build file on hard disk, CD-ROM, net drive to one ISO file.
    3. Extract files from ISO file.
    4. Edit ISO file in many format (such as Nero burning ROM, Easy CD Creator, CDRWin, CloneCD, BlindWrite, etc.).
    5. Make bootable ISO file.
    6. Create/Edit Audio CD image.

    Some details:

    1. Can directly edit the ISO image file.
    2. Can directly extract files and folders from ISO image file
    3. Can add / delete /create new directory /rename ISO file image content.
    4. Can make ISO file from hard disk document.
    5. Can create CD image from CD-ROM, maintain bootable information.
    6. Can process the compact disc boot information, you can directly add/remove/extract boot image of the ISO image.
    7. Supports nearly all known CD image file formats (.ISO, .BIN, .IMG, .CIF,.NRG, .BWI and so on) , and converts them to the standard ISO form image.
    8. May directly set the file/folder to hidden attribute
    9. Supports ISO 9660 Level1/2/3 and Joliet extension
    10. Automatically optimizes the ISO image file structure, saves the CD space.
    11. Supports the shell document type integration, Open Image files through double clicking them or the Right Click menu of the mouse with the open dialog.
    12. The double window user interface is extremely convenient to use.
    13. There are rich add-on tools, you can create ALL in 1 bootable compact discs, CD image file management, even the virtual CD/DVD drive , those functions are really powerful.


    The trial version shows a pop-up registration dialog at program startup and cannot save an ISO image of greater than 300MB.

    Read More..

    Cookie Editor


    What Are Cookies

    What Are Cookies?

    Cookies are pieces of information generated by a Web server and stored in the user's computer without their consent or knowledge, ready for future access.

    In most cases, not only does the storage of personal information into a cookie go unnoticed, so does access to it. Web servers automatically gain access to relevant cookies whenever the user establishes a connection to them, usually in the form of Web requests.

    By using cookies, a website can track what links you click on, the ads you respond to, and all sorts of other information.

    Not all cookies are bad. As a matter of fact, most cookies store harmless but useful information.

    Cookies allow user-side customization of Web information. If you sometimes visit 'finance.yahoo.com' you may notice that this page remembers your recent stock quotes. It's done through cookies.

    Another example: cookies can be used to store shopping lists of items a user has selected while browsing through a virtual shopping mall


    About Cookie Editor

    Cookie Editor

    Cookie Editor is an application that helps you manage cookies set by Internet Explorer.

    Cookie Editor allows you to maintain the level of your privacy by allowing you to see, edit or delete any unwanted cookies. It searches your drives for all IE cookies then displays them is easy grid-like format. You can examine content of any cookie or delete it.

    For advanced users, you can also edit the contents of cookies. So, for example, if you want to change your zip code for 'movies.yahoo.com', or move up the expiration date of a given cookie, you could do so without even opening your browser!

    Read More..

    Saturday, February 20, 2010

    Nauplius PRODUCTION PROCESS IN SHRIMP Spawning (Penaeus vannamei)


    Aquaculture Fisheries Development :
    Spawning WHITE SHRIMP (Penaeus vannamei)
    A. Introduction
    Penaeus vannamei, also called white shrimp and into Penaidae families. Members of this family to hatch their eggs outside the body after the egg released by the female shrimp. Penaeid shrimp can be distinguished from other types of shapes and number of teeth on rostrumnya. Penaeid vannamei has 2 teeth on the edge of the rostrum and 8-9 ventral teeth on the edge of the dorsal part of rostrum
    Penaeus vannamei culture has

    Read More..

    Monday, February 8, 2010

    MANAGEMENT PARENTS FISH


    Aquaculture Fisheries Development : Parents is a fish that has been mature or ripe gonad sex, the females have produced eggs and the males have sperm generate. In fish culture, the parent is the main production facilities. From the parent get their children, as the main production facilities in rearing activity.
    Parent selection is an early stage in fish culture activities that are critical success of the production. By making the correct selection of main stem will be obtained in accordance with the needs so the cultivation of fish productivity optimal. Selection of the parent fish cultivation can be done easily by taking into

    Read More..

    Friday, February 5, 2010

    TECHNICAL SPAWNING GIANT FRESH WATER SHRIMP (Macrobrachium rosenbergii de Man.)


    Aquaculture Fisheries Development : Prawns are fresh water shrimp large enough and taste delicious that have high economic value both for domestic consumption and export. Consumption of 20-30 size shrimp tails / kg in the local market can be sold at a price $35 - $50./kg in Indonesia. So to meet the needs of these markets requires a technique that prawns can produced in large enough scale.

    BIOLOGY
    Including prawns Palamonidae families. Board consists of shrimp 3 parts:

    Read More..

    Friday, January 29, 2010

    Chitika

    Chitika is an advertising program run by Chitika Inc.. Ads that appear shaped mini store could be placed in the post or elsewhere in the your website .

    In addition to Google Adsense, one of the programs pay per click (PPC) which provides online earnings potential is attractive enough Chitika. Better known by the generic name Chitika eMiniMalls, which is a flagship product Chitika (though not the only Chitika eMiniMalls), Chitika has some advantage over PPC similar programs .

    First, Chitika has a series of innovative advertising products are far more interesting and attractive (even compared to Adsense) as Chitika eMiniMalls, Related Product Unit (RPU), ShopLincs, ShopCloud $, Owna and Linx. Second, the product Chitika ads can be coupled with products other PPC like Google Adsense, ShoppingAds, TTZ Media or WidgetBucks. Third, Chitika has an affiliate program that allows each publishernya get additional income from referral. Fourth, the minimum pay out only $ 10. Very much different for example with Adsense that has the minimum pay out $ 100. Fifth, Chitika pays you through PayPal account (not like Adsense is not to support Paypal).

    If you have a blog to speak English with a minimum of 10,000 page views per month, there is no harm in trying to use Chitika as one of your blog monetization options.

    Read More..

    Conversions



    This section of the annex should be used in conjunction with the abbreviations section.
    Please note that the words gallon and tonne have different values depending on whether
    the source of the text you are reading is ‘British’ or ‘American’ in origin.

    Length:
    1 µm 0.001 mm = 0.000001 m
    1 mm 0.001 m = 1 000 µm = 0.0394 inch
    1 cm 0.01 m = 10 mm = 0.394 inch
    1 m 1 000 000 µm = 1 000 mm = 100 cm = 0.001 km = 39.4 inch = 3.28 ft =1.093 yd
    1 km 1 000 m = 1 093 yd= 0.621 mi
    1 inch 25.38 mm = 2.54 cm
    1 ft 12 inch = 0.305 m
    1 yd 3 ft = 0.914 m
    1 mi 1 760 yd = 1.609 km

    Weight:
    1 µg 0.001 mg = 0.000001 g
    1 mg 0.001 g = 1 000 µg
    1 g 1 000 000 µg = 1 000 mg = 0.001 kg = 0.0353 oz
    1 kg 1 000 g = 2.205 lb
    1 mt 1 000 kg = 1 000 000 g = 0.9842 UK t = 1.102 US t
    1 oz 28.349 g
    1 lb 16 oz = 453.59 g
    1 UK cwt 112 lb = 50.80 kg
    1 US cwt 100 lb = 45.36 kg
    1 UK t 20 UK cwt = 2 240 lb
    1 US t 20 US cwt = 2 000 lb
    1 UK t 1.016 mt = 1.12 US t

    Volume:
    1 µl 0.001 ml = 0.000001 l
    1 ml 0.001 l = 1 000 µl = 1 cc
    1 L 1 000 000 µl = 1 000 ml = 0.220 UK gallon = 0.264 US gallon
    1 m³ 1 000 l = 35.315 ft3 = 1.308 yd3 = 219.97 UK gallons = 264.16 US
    gallons
    1 ft³ 0.02832 m3 = 6.229 UK gallons = 28.316 l
    1 UK gallon 4.546 l = 1.2009 US gallons
    1 US gallon 3.785 l = 0.833 UK gallon
    1 MGD 694.44 GPM = 3.157 m3/min = 3 157 l/min

    Concentration - dissolving solids in liquids:
    1 % 1 g in 100 ml
    1 ppt 1 g in 1 000 ml = 1 g in 1 l = 1 g/l = 0.1%
    1 ppm 1 g in 1 000 000 ml = 1 g in 1 000 L = 1 mg/l = 1 µg/g
    1 ppb 1 g in 1 000 000 000 ml = 1 g in 1 000 000 l = 0.001 ppm = 0.001 mg/l

    Concentration - dilution of liquids in liquids:
    1 % 1 ml in 100 ml
    1 ppt 1 ml in 1 000 ml = 1 ml in 1 l = 1 ml/l = 0.1%
    1 ppm 1 ml in 1 000 000 ml = 1 ml in 1 000 l = 1 µl/l
    1 ppb 1 ml in 1 000 000 000 ml = 1 ml in 1 000 000 l = 0.001 ppm = 0.001 ml/l

    Area:
    1 m² 10.764 ft² = 1.196 yd²
    1 ha 10 000 m² = 100 ares = 2.471 acres
    1 km² 100 ha = 0.386 mi²
    1 ft² 0.0929 m²
    1 yd² 9 ft2 = 0.836 m²
    1 acre 4 840 yd² = 0.405 ha
    1 mi² 640 acres = 2.59 km²

    Temperature:
    °F (9 ÷ 5 x °C) + 32
    °C (°F - 32) x 5 ÷ 9

    Pressure:
    1 psi 70.307 g/cm²

    Scientific units
    Scientists have a different way of writing some of the units described in this glossary.
    They use what is called the Système International (SI). The units are referred to as SI
    units. For example: 1 ppt, which can be written as 1 g/l (see concentration above) is
    written as 1 g l-1 in scientific journals. 1 g/kg is written as 1 g kg-1. 12 mg/kg would be
    written as 12 mg kg-1.95 µg/kg would be written as 95 µg kg-1. A stocking density of
    11 kg/m3 would be written as 11 kg m-3. This system of standardization is not normally
    used in commercial aquaculture hatcheries and grow out units and has therefore not been
    used in this manual. More information about this topic can be found on the internet by
    searching for SI Units.

    Read More..

    Wednesday, September 9, 2009

    Fish feed : Alternative Fish Feed Quality

    Aquaculture Fisheries Development :
    When we return to the basic understanding, culture itself is to maintain a particular organism in a given period and place in order to obtain benefits. Provide a specific place in a limited situation that is no longer as free as in nature or primarily in the open sea food needs, of course, like it or not we should try to fulfill it. The food in this case is very limited when compared to when they live in their natural habitat in nature. Therefore, errors in managing the feed will result in a minimum of 60% in failure cultivation due to the cost of production in the culture that valued allocated to the management of the feed. Meanwhile, the cultivation was carried out to pursue the economic benefits. One in managing fish will lead to large losses.

    Like humans, fish require a complete nutrition and sufficient to her life. Major elements such as proteins, fats and carbohydrates as the main component of minerals and vitamins as well as supporting components, it is necessary to support the growth of an organism. How could the fish can grow well if given only feed from the rest of cassava leaves, coconut husks and even the remains of rice from the food we throw into our pond maintenance. That would probably cause other problems namely pisciculture environment will gradually feed contaminated by the rest of the sediment in the bottom waters that are not eaten by fish. These materials will accumulate at the bottom of the pool and combined waste from the fish itself so that one day pengurai bacteria could no longer work properly due to lack of oxygen so that results will be penguraiannya toxic compounds that are highly dangerous for the life of the cultivated organisms. Therefore, efforts to meet the demand for fish feed quality, affordable and environmentally friendly is needed.

    What is a qualified feed

    The value of fish feed quality is determined by how complete the availability of constituent components. The more complete constituent components, the higher the quality of the feed. Components of a complete feed that includes proteins, fats, carbohydrates, vitamins and minerals. Additional materials such as materials
    dyes, material towing (attractant), hormones, and binder (binders) are also required but is not mandatory in nature. Complete feed is nothing compared to when the fish pet damaged chopped fish only given. Compared with the feed / pellets, damaged chopped fish do not have complete nutrition for general
    only dominated by the protein and moisture content with a little phosphorus.

    Protein known as a body builder substances, cells or tissue. It collects various types of amino acids that are needed by the body. Absence of feed components will greatly affect the growth of both the growth of culture organisms to the body of fish (fish enlargement) and for the multiplication of cells / individuals (reproduction). The material commonly known protein is fish meal, shrimp meal, soy flour, industrial waste such as flour shrimp heads, fish intestines, rucah fish, blood meal, bone meal etc.. Each material has the number and types of different amino acids. Fish flour ranked first in the completeness of amino acid or in other words, fish meal is the best protein source in fish feed.

    Fat as a component of the absolute largest energy provider is. Daily activities ranging from swimming, find food, avoid enemies, metabolism, growth and resilience of the body requires energy. It contained fatty acids and fish generally can not make itself and must be given in feed. However, fish can synthesize fats into fatty acids which are needed by people such as linolenic and linoleic acid (omega-3). That fish only capable of making omega-3 fatty acids and capable of human intellectual and even people, as happened in the State Sakura, Japan. Not only that, Japan as one of the largest fish consumed country in the world capable of making people live longer by eating fish that contain omega-3 and will be protected from various diseases. Materials such as fish oil, soybean oil, palm oil, corn oil and canola oil are fat sources commonly used in the manufacture of fish feed.
    Although no direct effect on the growth, the presence of carbohydrates as an element of the cheapest energy providers in the feed is needed. Absence of feed components will force the protein to change its function of building materials into energy provider. This transfer-function will require greater energy levels resulting in fish ammonia gas emissions increased. Increased emissions of ammonia in the water will eventually result in polluted waters especially for basic organisms such as abalone and prawns. Starch, wheat flour, sago flour is commonly used materials. In addition to the energy provider, these materials also function as adhesive.

    Another case with the above three main components, vitamins and minerals, although a little but very necessary. Vitamins such as is necessary to streamline work metabolism. In addition these vitamins are usually associated with the immune system of fish as in vitamin C. Minerals as well as the existence of even a little but also desperately needed. For example, phosphor elements associated with primary bone formation in fish larvae food. Bending bones (abnormalities) was made possible due to the lack or absence of phosphorus in feed intake of fish. View fish's body is very disturbing in the abnormal growth can even cause death. When the fish is alive, must be sold at low cost; even be thrown away because they do not deserve to be sold.
    Cheap feed fish farmers yearning

    Amid the hard-paced life today, the fish farmers desperate for a cheap feed prices. Moreover, the feed component is crucial for the success or failure of a business culture. In comparison, the price of fish feed that was only omnivore Rp 5.000/kg from various manufacturers. Prices are much more expensive is certainly happening at the price of fish feed carnivorous species such as shrimp, snapper, grouper. Fortunately selling high value export market can still cover the cost of production so that most people still choose to keep the fish species are carnivorous. But when thinking about sustainable farming, this concept should be discarded away. Meanwhile, in several research and policy, this does not apply to fish farming herbivore species (primarily fish meal plants) such as grass carp because of the prices of these types of fish are cheaper and abundant availability in nature. This should be a concern and one of the farmers policy makers and governments to keep the fish from the types of herbivore fish farm fish for survival in the future, although in terms of product prices, fish species herbivore slightly cheaper than carnivorous fish.

    The high price of fish feed can not be separated from the high prices of materials existing feed makers. Components of fish meal and fish oil are the materials most expensive fat proteins. Therefore experts feed the world trying to replace fish meal and oil are increasingly scarce and expensive by sources other proteins through a series of studies.
    There are two directions of research development is now done feed the world, namely the utilization of waste protein (protein by product) and proteins from plants (vegetable protein). The material was selected because of cheap price and availability of natural resources. Waste materials such as flour protein, shrimp heads, crab flour skin, blood meal, bone meal, flour squid intestines stomach, intestines flour chicken, tuna belly flour, silkworm pupa powder, becomes grounds to know, etc. of alternative materials to replace fish meal sufficient to provide a positive influence for the growth of fish. Similarly, the use of fish oil is also relatively expensive compared to vegetable oil. Therefore, the protein material and fat from plants such as soy flour, corn meal, flour, oil seed flour, soybean oil, palm oil and corn oil into flour and reliable substitute for a good fish oil that does not affect the growth of fish at a certain limit. Although recognized amino acids and fatty acids in the material
    This is not as complete and as much as that found in the flour and fish oil. Even more controversial again, soybeans genetically engineered already widely used as a source of fish protein. The results of several studies indicate, the use of soy flour results in genetic engineering does not affect the fish's body for examination in almost all organs of fish are not carriers of the gene found in the soybean. Also good influence on the growth rate is not so different than the provision of non soy flour genetic engineering. Soybeans genetically engineered many of today's developed with the intent to prevent the plants from pests and diseases. So since
    in 1996 it is natural that the FAO world body issued a statement about not dangerous use of soy is genetically engineered to feed the fish. In addition to fish is not harmful to pets, is also safe for humans. However, controversy about this continues despite the frequency was reduced.
    Replacement of fish meal and oil with the materials mentioned above are encouraged to overcome the high prices of feed available. Coupled with the reduction in world fish stocks due to fishing management from the beginning was not concerned with aspects of sustainability. Therefore, according to a statement Worm et al (2006) in the journal nature, estimated in the year 2040 in the wild fish stocks will be exhausted if the world continues to consume fish like crazy today. Moreover, approximately 40% of fish that is used for the manufacture of fish flour. This will increase the difficulty of providing fish meal and make it grow
    expensive. However, due to amino acids and fatty acids contained in fish meal and oil are the best, then its replacement with a maximum of 20% of soybean flour and 15% for soybean oil for example, is still worth it because there was no difference in the growth of snapper. Similarly, waste materials other proteins, is still no substitute for fish meal in total in the formulation of fish feed manufacture. Indeed the concept of "fish eat fish" is still true. However, this concept is not always true and can be applied, given the availability of fish on the dwindling natural.

    Environmentally friendly feed, fish feed future

    In addition to a very important role to develop pet fish, feed is also very large potential to reduce the cultivation of aquatic environmental quality through the remainder of the feed that is not consumed by fish waste and fish feces and urine during metabolic processes. The main waste of feed, feces and urine is ammonia and phosphorus; second again this material comes from fish meal protein. Ammonia content of the main elements are nitrogen and phosphorus (N) and (P) that can make a fertile waters (eutrophication) in a certain limit. But if these two elements accumulation exceeds the limit, then there was what is called the "excessive fertility" (hypereutrofikasi). These conditions resulted in water becomes starved of oxygen and bacteria perurai will produce toxic compounds that are dangerous for the life of the cultivated organisms. Organisms are particularly vulnerable to this is the shrimp FAQs for this species living in the bottom waters that will be most affected first. Similarly with budidayanya fish, will experience mass mortality during Welling up (removal of toxic compounds into surface water) in the rainy season. This occurs due to mass heavy rain that falls to the bottom and replace the base substrate that already contains this toxin up (due to heavy type of lighter) to the surface and poison the fish are kept so that the experience of death. While the danger that comes from the use of excessive fish oil will result in accumulated chemical compounds called dioxins. Dioxins are contained in fish oil at a certain level would be harmful to the body because it stimulates cancer.

    To overcome this, there are two strategies that can be done. First, the use of materials of low phosphorus content. This can only be obtained with the use of proteins derived from plants such as soy flour, corn flour etc.. In addition to low cost, the materials of this plant proteins can be relied upon to replace fish meal by up to 20% of this quantity which does not result in reduced growth of fish. Similarly, vegetable oil, feeding the feed with fish oil would also reduce the possibility of accumulation of dioxin when compared to fat energy source that only comes from fish oil. The second strategy is to streamline the use of protein by the fish so that the content of nitrogen is wasted in faeces and urine was also reduced. This effort is done by mixing the ingredients of calcium monophosphate (Ca (H2PO4) 2) into the feed. This material is one of the mineral compounds that can streamline the use of fish protein metabolism in the process so that the waste waters of proteins to be low.
    Aquaculture Fisheries Development.

    Read More..